%% 29 Jan 2001 : have edited this file to make it into a simple latex
%% template for writing a talk. Running the commands:

%%  latex talktemplate
%%  latex talktemplate
%%  dvips -o talktemplate.ps talktemplate.dvi
%%  ghostview talktemplate.ps

% Will allow you to view the resulting document. This document has been
% tested and will compile as-is on a sensible system - check it BEFORE editing.

	% This is a sample document for seminar.sty, v0.93 (and maybe later).
%
% This file contains both landscape and portrait mode slides.
% Choose one of the following to print them out:
%  - If using PSTricks, try the semcolor style option.
%  - If using Rokicki's dvips, try the semrot style option.
%  - To print the landscape slides, put \landscapeonly in the preamble.
%    To print the portrait slides, include the portrait style option and
%    put \portraitonly in the preamble.
%
%
\documentclass[%
  slidesonly,%  Try notes or notesonly instead.
  %notes,%      Use instead of slidesonly to typeset the notes.
  %notesonly,%  Use instead of slidesonly to typeset notes and slides.
  %semcolor,%   Try me if using PSTricks.
  %semrot,%     Try me if using Rokicki's dvips.
  %semhelv,%    Try me if using a PostScript printer.
  %article,%    Try me.
  %portrait,%   Try me.
  sem-a4,%     Try me if using A4 paper.
  semlayer%     This must be included, but you need the semcolor option to
  ]{seminar}                                  % actually see the overlays.

\usepackage{graphicx}
\usepackage{color}
\usepackage{amssymb} % Symbols for itemise
\usepackage{colortbl}

\slidesmag{5}
\articlemag{1}

%\twoup                     % Try me for twoup printing.

%\portraitonly              % To print only portrait slides
%\landscapeonly             % To print only landscape slides

%\notslides{\ref{questions}-7,1}   %Try me: The slides are omitted.
%\onlyslides{\ref{questions}-7,1}  %Try me: Only these slides are included.
%\onlynotestoo                     %Try me: For selecting notes as well.

\colorlayers{red,blue}      % Try deleting this if using the semcolor option,
                            % to get \blue and \red to use PostScript color.

%\overlaysfalse             % Suppress overlays with semcolor option.
%\layersfalse               % Suppress color layers with semcolor option.

\rotateheaderstrue          % Try this out if using rotation macros.

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Some definitions
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% Set up some colors
\definecolor{myblue}{rgb}{0.14,0.11,0.49}
\definecolor{myred}{rgb}{0.74,0.22,0.15}
\definecolor{mygreen}{rgb}{0.05,0.52,0.42}
\definecolor{myyellow}{rgb}{0.96,0.92,0.13}
\definecolor{myorange}{rgb}{1,0.61,0.36}
\definecolor{mypurple}{rgb}{0.71,0.02,1}

\definecolor{htc}{rgb}{1,1,1} % heading text colour
\def\rowcolora  {\rowcolor[rgb]{.13,.38,.40}} % Blue/green 
%\def\rowcolora  {\rowcolor[rgb]{.51,.13,.16}} % Deep red
\def\rowcolorb  {\rowcolor[rgb]{1,1,.91}}
\def\rowcolorc  {\rowcolor[rgb]{1,1,.91}}
\newcolumntype{A}{>{\columncolor[rgb]{.13,.38,.40}}c}


% BABAR in text 
\def\babar{\mbox{\sl B\hspace{-0.35em} {\footnotesize\sl A}\hspace{-0.35em} 
B\hspace{-0.35em} {\footnotesize\sl A\hspace{-0.1em}R}}}
\renewcommand\labelitemi[0]{\textcolor{myred}{\tiny\(\blacktriangleright\)}}
\renewcommand\labelitemii[0]{\textcolor{myorange}{\small\(\bullet\)}}
\renewcommand\labelitemiii[0]{\textcolor{mypurple}{\tiny\(\blacklozenge\)}}
\def\KS         {K\"uhn and Santamaria}
\def\GS         {Gounaris and Sakurai}

% Change default font
\renewcommand{\rmdefault}{pag}

% Title and author
\title{This is the title of my talk}
\author{\sl An Author}
\date{\sl ~~~December 2000}  % date that appears on the title page
			     % (``~`` are extra hard spaces)

\newcommand{\sref}[1]{SLIDE \ref{#1}}
\newcommand{\heading}[1]{\begin{center}\large\bf\textcolor{myblue}{#1}\end{center}}

\newpagestyle{MH}{~~~~~~~~13 December, 2000\hfil\thepage}{} %appears
							    %on each page
\pagestyle{MH}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{document}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\maketitle          % This won't show up when \onlynotestoo is in effect.

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{slide}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

  \ifslidesonly              % Title slide only for slidesonly selection.
    \maketitle
    \addtocounter{slide}{-1}
    \slidepagestyle{empty}
  \fi
\vspace{0.5cm}
\begin{center}
\includegraphics[width=1.5cm,height=1.8cm]{logo.eps}  %put your
							  %institute
							  %logo here
\hspace{0.5cm}
\includegraphics[height=1.8cm]{unilogo_red.eps}     %put your uni
							%logo here
\end{center}
\end{slide}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{slide}\heading{Contents}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\begin{itemize}

\item Introduction
\item Bit of background
\item What I'm going to mainly talk about
	\begin{itemize}
	\item don't put too much on a slide
	\item these slides are upside down - use ``seascape'' mode on
your ghostview-er
	\end{itemize}
\item Some results
\item Summary and conclusion
\end{itemize}

\end{slide}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{slide}\label{a_slide}\heading{Introduction}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\smallskip

\begin{itemize}

\item Using bullet points is clear

\item You can also include sublists

\begin{itemize}
\item here's the first subitem
\item here's the second subitem
\end{itemize}

\item more stuff

\end{itemize}
\end{slide}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{slide}\heading{Another heading}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\footnotesize{
\begin{itemize}
\item Enclosing your list in footnotesize and brackets like on this
page makes the text come out a still-reasonable size
\item Still easily readable
\end{itemize}

You can also have numbered lists
\begin{enumerate}
\item first item
\item Maths works as usual with latex too. e.g. $\alpha$, $\beta$,
$\gamma$, \ldots
\end{enumerate}
}
\end{slide}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{slide}\heading{\boldmath{$\tau^- \rightarrow \pi^- \pi^0 \nu_{\tau}$}}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

An equation: (note the syntax in the text file to prevent the equation
being numbered)

\begin{eqnarray*}\color{mygreen}
\frac{d\Gamma}{dq^{2}} =
\frac{G_{F}^{2}|V_{ud}|^{2}S^{\pi\pi}_{EW}} {32\pi^{2}M^{3}_{\tau}}
v^{\pi \pi ^{0}}(q^{2})
\color{black}
\end{eqnarray*}
\begin{itemize}
\item another bullet point
\end{itemize}
Use footnotesize for most equations - or they can look too big
{\footnotesize
\begin{equation}\color{mygreen}
v^{q^2}) = \left(\frac{2p_{\pi}}{\sqrt{q^2}} \right)^3 
\color{black}
\end{equation}}
\end{slide}


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{slide}\heading{including graphics}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
{\footnotesize
\begin{itemize}
\item Graphics are included easily with latex
\item don't use the graphics caption command, better to have the page
title as your caption, or write what it is in normal text above/below
the picture
\end{itemize}}
\begin{center}
\includegraphics[width=4cm]{eranalysis99fit2858loglin.eps}
\end{center}
\end{slide}


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{slide}\heading{spacings}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{itemize}
\item {\bf bold:} useful to use bold to highlight bits
\item {\bf spacing}: can put extra spacing using vspace commands
        \begin{itemize}
        \item first entry
        \vspace{0.2cm}
        \item second entry is more spaced
        \vspace{0.2cm}
        \item 3rd entry is equally spaced
        \vspace{0.2cm}
        \end{itemize}
 \end{itemize}
\end{slide}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{slide}\heading{put your caption here as page title}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\vspace*{0.2cm}
\begin{center}
\includegraphics[width=4cm]{eranalysis99fit2858loglin.eps}
\includegraphics[width=4cm]{eranalysis99fit2858loglin.eps}
\end{center}
\end{slide}


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{slide}\heading{Conclusions}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\begin{itemize}
\item summary point 1
\item more summary stuff
\item plans for future
\item projections to future
\end{itemize}
\end{slide}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\end{document}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


